Metal Roof Cost Calculator (2026)
Last updated · Prices reviewed
A metal roof costs about $7,400–$84,900 on a 1,000–3,000 sq ft home. Enter your home for your own range.
Estimate your metal roof
Free · no sign-up · results update as you type
26.6° slope
Medium
The sloped roof surface, from a quote, plans or the roofing calculator. Pitch then sets only the steep-roof labor factor.
Typical $32,100, range $21,000–$50,900. National estimate
Estimated metal roof cost · Standing seam metal
$32,100typical
Range $21,000–$50,900
- Materials (approx.)
- $11,500
- Installation labor (approx.)
- $17,300
- Old roof removal 1 layer
- $3,300
Total (typical) $32,100
National estimate
Medium evidence Weakest figure used: the standing seam metal price (medium).
Prices checked November 2026
- Roof area
- 2,214 sq ft
- Squares (no waste)
- 22.1
- Pitch angle
- 26.6°
- Per square installed, before tear-off
- $1,300 · Limited evidence for this type’s price
- Every price comes from a named source, with the date we checked it.
- No contact details asked
- An estimate, not a quote
A metal roof on a 1,000–3,000 sq ft home costs about $7,400–$84,900, or about $5.50–$20.00 per square foot of roof installed. The type of metal, your roof’s size and pitch, and how many old layers come off decide where your price lands. Enter your home above, then compare written quotes.
Metal roof cost by home size
Installed cost of a metal roof for homes from 1,000–3,000 sq ft. Roof area assumes one story, a 6/12 pitch and 10% for overhangs, with one old layer removed.
| Home size | Roof area | Squares | Metal |
|---|---|---|---|
| 1,000 sq ft | 1,230 sq ft | 12.3 | $7,400–$28,300 |
| 1,500 sq ft | 1,845 sq ft | 18.4 | $11,100–$42,400 |
| 2,000 sq ft | 2,460 sq ft | 24.6 | $14,800–$56,600 |
| 2,500 sq ft | 3,075 sq ft | 30.7 | $18,400–$70,700 |
| 3,000 sq ft | 3,690 sq ft | 36.9 | $22,100–$84,900 |
Sources: This Old House – New roof cost; HomeGuide – Metal roof cost; InterNACHI – Standard Estimated Life Expectancy Chart. How we estimate
How much is a metal roof by type
The three common kinds of metal roof, with the installed price per square foot of roof for each.
Standing seam metal
Long panels joined by raised seams that lock together, with the fasteners hidden under the seams.
$9.00–$20.00 per sq ft installed
Typical lifespan: 40–70 years
Metal shingles
Metal pressed into the shape of shingles, slate or shakes and laid in overlapping rows.
$8.00–$18.00 per sq ft installed
Typical lifespan: 40–70 years Limited evidence
Corrugated / exposed-fastener metal
Ribbed or corrugated panels screwed through the face, so the screw heads show on the roof.
$5.50–$12.00 per sq ft installed
Typical lifespan: 20–40 years Limited evidence
Sources: Roofing Observations – Shingle roof cost guide; This Old House – New roof cost; HomeGuide – Metal roof cost; HomeGuide – Standing seam metal roof cost; Angi – Metal shingles vs standing seam; RoofingCalc – Metal roof cost; Western States Metal Roofing – Standing seam cost; Roofing Observations – Metal roof cost guide; InterNACHI – Standard Estimated Life Expectancy Chart; JLC – 4 tips for trouble-free metal roofs. How we estimate
What changes the price of a metal roof
The same home can get quite different metal roof quotes. These are the main reasons.
Roof size
Metal is priced by the square, 100 sq ft of roof surface. The surface follows the footprint and pitch, so a one-story home has about twice the roof of a two-story home with the same living area.
Metal type
Standing seam, metal shingles and exposed-fastener panels each have their own price per square foot, shown in the cards above. Switch between them in the calculator to compare.
Pitch
Pitch is the roof’s steepness, rise per 12 inches of run. A 12/12 roof has about 41% more surface than a flat one over the same house, and our estimate raises the labor and tear-off part on steep roofs.
Old layers
Tear-off is removing the old roofing down to the decking. Each layer removed adds labor and disposal, which the calculator adds per layer.
Roof shape
Hips, valleys, dormers, chimneys and skylights all need panels cut to fit and extra trim and flashing, so a cut-up roof takes longer than a simple gable of the same area.
Region and access
Our ranges are a US national average; labor and material prices differ by area. A tight lot or no room to stage long panels can also add time.
Decking
Decking is the board layer the roof is fastened to. Damage often shows only once the old roof is off, so quotes usually price replacement sheets separately.
How to read a metal roof quote
Get written quotes from more than one licensed, insured roofer and compare them line by line.
Price per square
Divide each quote’s total by its number of squares so you compare like with like, and check the roofers measured a similar roof size. The square count from the calculator above is a useful cross-check.
Line items to look for
- Metal panels or shingles: the product name, the metal and its thickness or gauge as the maker lists it, and the colour.
- Underlayment: the layer laid over the decking before the metal goes on.
- Trim and flashing: the pieces along the eaves, rakes, ridge and valleys and around chimneys, walls and vents.
- Fasteners or clips: screws for exposed-fastener panels, or the clips that hold standing seam panels.
- Tear-off and disposal: removing each old layer and hauling it away.
- Decking repairs: usually a price per sheet, charged only for sheets that need replacing.
- Permit and clean-up: who arranges any permit your area needs, and debris removal at the end.
If something you expect is missing, ask whether it is included. Our figures are estimates; the written quote is what you agree to.
Metal vs shingles in brief
Both are priced per square foot of roof area, so the same roof can be compared directly. Installed, metal costs about $5.50–$20.00 per sq ft and asphalt shingles about $4.00–$8.00. Typical lifespans are 40–70 years for metal and 20–35 years for asphalt, depending on climate, installation and maintenance.
To see both for your home, switch the material in the roof replacement cost calculator. The full comparison is in our metal vs shingles guide.
Metal roof cost questions
How much does a metal roof cost?
A metal roof on a 1,000–3,000 sq ft home costs about $7,400–$84,900, with one old layer removed. The type of metal, your roof’s size and its pitch decide where yours lands, so enter your home in the calculator above, then compare the table by home size.
How much is a metal roof per square foot?
Metal roofing costs about $5.50–$20.00 per square foot of roof area, installed (materials and labor). Each type’s range is in the cost by metal type cards.
How does the metal roof calculator work?
It works out your roof area from your living area, stories and pitch, or takes the roof area you enter. Then it multiplies by the installed price per square foot for the metal type you choose, raises the labor and tear-off part on steep roofs and adds tear-off for each old layer. See how we estimate.
What does metal roof replacement cost include?
Replacing an existing roof with metal includes removing the old roofing, and each layer that comes off adds labor and disposal. Choose the number of old layers in the calculator to include it. Repairs to the decking underneath are usually priced separately once the old roof is off.
Can you paint a metal roof?
Yes, a metal roof can be painted. The paint or coating needs to be made for metal, and the surface usually has to be cleaned and prepared first. Check the panel maker’s guidance and your warranty before you start, and for any work on the roof itself hire a licensed, insured contractor.
How we estimate
- Prices: installed cost per square foot of roof area (US national average), built from named sources, each with the date we checked it, listed on our methodology page.
- Roof area: living area ÷ stories × 1.10 for overhangs × pitch multiplier, or the roof area you enter.
- Cost: roof area × installed price per sq ft for the metal type, split into materials and labor by the labor share; labor and tear-off (per sq ft for each old layer) × the steep-roof factor.
- Price per square: the installed price per sq ft × 100, the new roof only, without tear-off.
- Rounding: totals to the nearest $100; prices per square to the nearest $5.
An estimate, not a quote. Get written quotes from licensed, insured roofers.