Asphalt Shingle Roof Cost Calculator (2026)
Last updated · Prices reviewed
An asphalt shingle roof costs about $5,500–$40,600 on a 1,000–3,000 sq ft home. Enter your home for your own range.
Estimate your shingle roof
Free · no sign-up · results update as you type
26.6° slope
Medium
The sloped roof surface, from a quote, plans or the roofing calculator. Pitch then sets only the steep-roof labor factor.
Typical $12,200, range $7,700–$19,900. National estimate
Estimated shingle roof cost · 3-tab shingles
$12,200typical
Range $7,700–$19,900
- Materials (approx.)
- $3,500
- Installation labor (approx.)
- $5,300
- Old roof removal 1 layer
- $3,300
Total (typical) $12,200
National estimate
Medium evidence Weakest figure used: the tear-off price (medium).
Prices checked November 2026
- Roof area
- 2,214 sq ft
- Squares (no waste)
- 22.1
- Shingle bundles (incl. 10% waste)
- 74
- Per square installed, before tear-off
- $400 · Limited evidence for this type’s price
- Every price comes from a named source, with the date we checked it.
- Some figures have limited evidence.
- No contact details asked
- An estimate, not a quote
Replacing an asphalt shingle roof on a 1,000–3,000 sq ft home costs about $5,500–$40,600, or about $4.00–$8.00 per square foot of roof installed. Roof size, pitch, the shingle type and the number of old layers removed set your price. Enter your home above, then compare written quotes.
Shingle roof replacement cost by home size
Installed cost of an asphalt shingle roof for homes from 1,000–3,000 sq ft. Roof area assumes one story, a 6/12 pitch and 10% for overhangs, with one old layer removed.
| Home size | Roof area | Squares | Asphalt shingle |
|---|---|---|---|
| 1,000 sq ft | 1,230 sq ft | 12.3 | $5,500–$13,500 |
| 1,500 sq ft | 1,845 sq ft | 18.4 | $8,300–$20,300 |
| 2,000 sq ft | 2,460 sq ft | 24.6 | $11,100–$27,100 |
| 2,500 sq ft | 3,075 sq ft | 30.7 | $13,800–$33,800 |
| 3,000 sq ft | 3,690 sq ft | 36.9 | $16,600–$40,600 |
Sources: HomeGuide – Asphalt shingle roof cost; This Old House – New roof cost; InterNACHI – Standard Estimated Life Expectancy Chart; Fixr – Asphalt shingles cost (3-tab, architectural, luxury). How we estimate
Asphalt shingle roof cost by shingle type
The three main kinds of asphalt shingle, with the installed price per square foot of roof for each.
3-tab shingles
Flat, single-layer shingles cut into three tabs along the bottom edge, giving an even, repeating pattern.
$3.00–$6.00 per sq ft installed
Typical lifespan: 15–20 years
Architectural shingles
Shingles made from two or more layers bonded together, giving a thicker, textured look. Also called dimensional or laminated.
$4.00–$8.00 per sq ft installed
Typical lifespan: 20–30 years
Premium / designer shingles
Shingles shaped and coloured to look like slate or wood shakes, sold as premium or designer lines.
$6.50–$16.00 per sq ft installed Limited evidence
Typical lifespan: No reliable figure yet
Sources: HomeGuide – Asphalt shingle roof cost; HomeGuide – Roofing shingles cost; HomeGuide – Architectural shingles cost; Roofing Observations – Shingle roof cost guide; InterNACHI – Standard Estimated Life Expectancy Chart; Fixr – Asphalt shingles cost (3-tab, architectural, luxury); RoofingCalculator.com – roof cost. How we estimate
What changes the price of a shingle roof
Two quotes for the same house can differ a lot. These are the things that move a shingle roof’s price.
Roof area
Shingle work is priced by the square: 100 sq ft of roof surface. More squares means more shingles, more underlayment and more hours, so the total follows the roof area.
Shingle type
3-tab, architectural and premium shingles each have their own installed price per square foot, in the cards above. The calculator switches between them.
Pitch
A 6/12 roof has about 12% more surface than its footprint, and a 12/12 roof about 41% more. Our estimate also raises the labor and tear-off part on steep roofs, which take longer to shingle.
Layers to remove
Every old layer stripped off before the new shingles go on adds labor and disposal. Choose the number of layers in the calculator; your roofer can confirm how many there are.
Hips, valleys and openings
Each hip, valley, chimney, skylight and vent means cut shingles and extra flashing, so a complex roof costs more than a simple one of the same area.
Where you live
Our figures are a US national average. Local labor rates and material prices, and how easy it is to get a dumpster and deliveries to the house, can put a quote above or below them.
Decking condition
Soft or damaged decking under the old shingles has to be replaced before the new roof goes on. It is usually found during tear-off and charged per sheet.
How to read a shingle roof quote
Get written quotes from more than one licensed, insured roofer, then check them on the same basis.
Squares and bundles
Roofers measure in squares (100 sq ft of roof) and buy shingles in bundles. Standard shingles come 3 bundles to a square; some products differ, so check the wrapper. A quote may list squares, bundles or both, usually with a waste allowance added. Enter the roof area or squares and the roofer’s waste figure in the shingle calculator to check the count, and divide each total by its squares to compare price per square.
Line items to look for
- Shingles: the brand and product line, the type and the colour.
- Starter strip and ridge cap: the shingles along the eaves and over the ridge and hips.
- Underlayment: the layer that goes over the decking before the shingles.
- Flashing and drip edge: metal at walls, chimneys, valleys and along the roof edges.
- Vents: any ridge or roof vents being replaced or added.
- Tear-off and disposal: each old layer removed and hauled away.
- Decking: a price per sheet for any that needs replacing.
- Permit and clean-up: who handles any permit, and the final debris removal and nail sweep.
Ask about anything you expect but can’t find. These figures are estimates; the written quote is what you agree to.
3-tab vs architectural shingles
3-tab shingles are a single flat layer; architectural shingles are two or more layers bonded together for a thicker, textured look. Installed, 3-tab costs about $3.00–$6.00 per sq ft and architectural about $4.00–$8.00.
Shingle roof cost questions
How much does an asphalt shingle roof cost?
Replacing an asphalt shingle roof on a 1,000–3,000 sq ft home costs about $5,500–$40,600, with one old layer removed. Your roof’s size, pitch and shingle type move the price, so enter your home in the calculator above and compare the table by home size.
What is the shingle roof replacement cost per square foot?
Asphalt shingles cost about $4.00–$8.00 per square foot of roof area, installed, which covers materials and labor. The range for each shingle type is in the cost by shingle type cards.
What does a shingle roof replacement include?
Usually tear-off of the old layers, new underlayment, starter strip, the shingles, ridge cap, flashing and drip edge, and clean-up. Decking repairs are normally priced per sheet once the old roof is off. The quote guide below lists what to look for.
How many bundles of shingles does my roof need?
Standard shingles come 3 bundles to a square, and a square is 100 sq ft of roof. A 2,000 sq ft roof is 20 squares, or 60 bundles before waste. The shingle calculator adds a waste allowance for you.
Does the shingle type change the price?
Yes. 3-tab, architectural and premium shingles each have their own installed price per square foot, shown in the cards above. Switch the shingle type in the calculator to see the difference for your roof.
How we estimate
- Prices: installed cost per square foot of roof area (US national average), built from named sources, each with the date we checked it, listed on our methodology page.
- Roof area: living area ÷ stories × 1.10 for overhangs × pitch multiplier, or the roof area you enter.
- Cost: roof area × installed price per sq ft for the shingle type, split into materials and labor by the labor share; labor and tear-off (per sq ft for each old layer) × the steep-roof factor.
- Price per square: the installed price per sq ft × 100, the new roof only, without tear-off.
- Bundles: squares × 3, rounded up, before any waste allowance.
- Rounding: totals to the nearest $100; prices per square to the nearest $5.
An estimate, not a quote. Get written quotes from licensed, insured roofers.